ARC-1886-xNxI
Starting Price:
$1,390.00
The ARC-1886-xNxI presents the advanced hardware RAID technology in enhanced performance of using 6 Bays M.2 NVMe and an improved enterprise data protection of using two SAS/SATA ports. The hardware RAID adapter accesses the data of NVMe disk array with a workload preset value. While the workload level stays within the preset value, the RAID adapter would constantly back up the data of NVMe disk array to the other two SAS/SATA ports hard disk arrays. This is designed in a 1.6 GHz dual-core ROC processor, DDR4-2666 memory and PCIe Gen 4.0 host/device interface and supports RAID levels 0, 1, 10, 3, 5, 6, Single Disk or JBOD.
This is an Alert
Note:
Adding color to TALINO Chassis will cost an extra $400 and have a one-month additional lead time. Exact color may vary.
Adding color to TALINO Chassis will cost an extra $400 and have a one-month additional lead time. Exact color may vary.
Online Purchases and Pricing are for the US only. For International Purchases and Support Please Contact Us. Image represented in photograph is stock; customizations will render each system unique.
PRODUCT DESCRIPTION
Product Highlights:
- Controller-level hardware encryption
- SED support for encryption capable drives
- Support up to 256 SATA or SAS devices using SAS expanders
- Firmware automatically backup from NVMe RAID to SAS/SATA RAID
- Device interface PCIe Gen4 NVMe / 6Gb/s SATA per M.2 slot
- PCIe 4.0 host interface, PCIe Gen4 x8 lanes at maximum transfer rate up to 128Gb/s
- Supports ip to 4/6 x PCIe Gen 4.0 M.2 slots and 1x SFF-8654 [x8] / 2 SATA connector
- CBM module or on-board battery (CR2032) to keep on M.2 fault LED status for troubleshooting
- Hardware-based RAID solution that supports RAID levels 0,1, 10,3,5,6 Single Disk and JBOD
- Implemented *GB 72-bit DDR4-2666 SDRAM providing hardware RAID assist engine for parity calculations
- Dynamically allocate storage 12Gb/s SAS/SATA/PCIe (NVMe) to NVMe slot1 and SATA/SAS ports on ARC-1886-6N2I
- Support off module power loss protection (PLP) saves data issued without data loss at power fail using optional CBM module
PRODUCT COMPARISON
| ARC-1886-6N2I | ARC-1886-4N8I | ARC-1886-4X8I | ARC-1886-4X12 | ||
| Form Factor | 107.2(H) x 262(L) mm | 107.2(H) x 205(L) mm | |||
| I/O Processor | Tri-Mode Dual Core ARM A15 1.6GHz ROC | ||||
| On-Board Cache | 8GB on-board DDR4-2666 SDRAM | ||||
| Physical Dimensions | Low Profile: 167.65(L) x 64.4(H) mm | ||||
| Drive Connector | 2 x SATA & 6 x M.2 Connector | 1 x SFF-8654 [X8] & 4 x M.2 Connector | 1 x SFF-8654 [x8] 1 x SFF-8644 [x4] | 2 x SFF-8654 [x8] 1 x SFF-8644 [x4] | |
| Drive Support | 12Gb/s SAS, 6Gb/s SATA, Gen 4.0 PCIe (NVMe) | Up to 512 12Gb/s SAS or 6Gb/s and 3Gb/s SAS/SATA HDDs/SSDs, using 12Gb/s SAS expander up to 32 NVMe drives through the PCIe switches | |||
| Management Port | In-Band: PCIe / Out-of-Band: LAN Port | ||||
| Enclosure Ready | SGPIO, SMP, SES2 and UBM | ||||
| Operating Voltage | 12V | ||||
| Power Consumption | Approximately 14 Watts (without M.2 drive) | Approximately 14 Watts | |||
| Operating Temperature | 0 °C to 60 °C | ||||
| Operating Humidity | 10% to 85%, non-condensing | ||||
| Cache Protection | ARC-1886-CBM | ||||
Related products
-
ARC-4038-8/12
$1,200.00 Select options This product has multiple variants. The options may be chosen on the product page -
ARC-73xx JBOD Series
$2,999.00 Select options This product has multiple variants. The options may be chosen on the product page
