Back to 3D Design

Cable Wrap

A pair of posts that can be used to wrap excess cable length up. They can be placed closer together or further apart to adjust the amount of cable that can wrap around them.

Print Settings Used:

  • Printer used: JGAURORA A5S
  • Supports: Yes
  • Infill Density: 50%
  • Build Plate Adhesion: Skirt
  • Filament Type: PLA

Set other settings as needed for printer and filament used.

Print on face down side of STL file. Some sanding and/or trimming may be required.

Total Downloads:
Scroll to Top