Drive Imaging Tray

A tray to hold a drive while it’s imaged. Ideal for when you need a place to put a drive hooked up to a T356789iu, but the cable is too short to reach the desk or the top of the TALINO. It can also be used as a shelf for other objects.

Print Settings Used:

• Printer used: JGAURORA A5S
• Supports: Yes
• Infill Density: 50%
• Build Plate Adhesion: Skirt
• Filament Type: PLA

Set other settings as needed for printer and filament used.

Print on face down side of STL file. Requires one print of the shelf, and two prints of the support. Some sanding and/or trimming may be required.